Skip to main content
Arduino

Return to Question

edited tags
Link
VE7JRO
VE7JRO
  • 2.5k
  • 19
  • 28
  • 31
Code formatting.
Source Link
Edgar Bonet
Edgar Bonet
  • 45.2k
  • 4
  • 42
  • 81

#include "NexDualStateButton.h" #include "Nextion.h"

#include "DHT.h"

#define DHTPIN 27 #define DHTTYPE DHT22

DHT dht(DHTPIN, DHTTYPE); int R1 = 2; uint32_t dual_state ;

NexText tTempC = NexText(0, 4, "tTempC"); NexText tHumidity = NexText(0, 6, "tHumidity"); NexDSButton bt0 = NexDSButton(0, 8, "bt0");

char buffer[100] = {0};

NexTouch *nex_listen_list[] = { &bt0, NULL };

void bt0PopCallback(void *ptr) { uint32_t dual_state; NexDSButton *btn = (NexDSButton *)ptr;

dbSerialPrintln("bt0PopCallback");
dbSerialPrint("ptr=");

dbSerialPrintln((uint32_t)ptr);
memset(buffer, 0, sizeof(buffer));

bt0.getValue(&dual_state);

if(dual_state>0) { digitalWrite(R1, LOW); } else { digitalWrite(R1, HIGH); }

} void setup(void) { dht.begin(); Serial.begin(9600); pinMode(R1, OUTPUT);

nexInit(); bt0.attachPop(bt0PopCallback, &bt0);

Serial.println("DHT Sensor Reading"); dbSerialPrintln("setup done");

}

void loop(void) {

nexLoop(nex_listen_list); float t = dht.readTemperature();

float h = dht.readHumidity();

if (isnan(h) || isnan(t)) { Serial2.println(F("Failed to read from DHT sensor!")); return; }

static char temperatureCTemp[10]; dtostrf(t, 6, 2, temperatureCTemp); tTempC.setText(temperatureCTemp);

char hTemp[10] = {0}; utoa(int(h), hTemp, 10); tHumidity.setText(hTemp);

Serial.print(F("Humidity: ")); Serial.print(h); Serial.print(F("% Temperature: ")); Serial.print(t); Serial.print("°C "); //Serial2.print(F("tTempC.txt="));

//Serial.print(""); //Serial.print(F("tHumidity.txt:\ ")); //Serial.print(h); //Serial.write(0xff); //Serial.write(0xff); //Serial.write(0xff);

}

#include "NexDualStateButton.h"
#include "Nextion.h"
#include "DHT.h"

#define DHTPIN 27
#define DHTTYPE DHT22

DHT dht(DHTPIN, DHTTYPE);
int R1 = 2;
uint32_t dual_state ;

NexText tTempC = NexText(0, 4, "tTempC");
NexText tHumidity = NexText(0, 6, "tHumidity");
NexDSButton bt0 = NexDSButton(0, 8, "bt0");

char buffer[100] = {0};
 
NexTouch *nex_listen_list[] =
{
    &bt0,
    NULL
};

void bt0PopCallback(void *ptr)
{
  uint32_t dual_state;
  NexDSButton *btn = (NexDSButton *)ptr;
   
  dbSerialPrintln("bt0PopCallback");
  dbSerialPrint("ptr=");
 
  dbSerialPrintln((uint32_t)ptr);
  memset(buffer, 0, sizeof(buffer));
   
  bt0.getValue(&dual_state);
 
  if(dual_state>0)
  {
    digitalWrite(R1, LOW);
  }
  else
  {
    digitalWrite(R1, HIGH);
  }
}

void setup(void) {
   dht.begin();
   Serial.begin(9600);
   pinMode(R1, OUTPUT);
 
   nexInit();
   bt0.attachPop(bt0PopCallback, &bt0);
   
   Serial.println("DHT Sensor Reading");
   dbSerialPrintln("setup done");
}

void loop(void) {
  nexLoop(nex_listen_list);
  float t = dht.readTemperature();
  float h = dht.readHumidity();
 
  if (isnan(h) || isnan(t)) {
    Serial2.println(F("Failed to read from DHT sensor!"));
    return;
  }
 
  static char temperatureCTemp[10];
  dtostrf(t, 6, 2, temperatureCTemp);
  tTempC.setText(temperatureCTemp);

  char hTemp[10] = {0};
  utoa(int(h), hTemp, 10);
  tHumidity.setText(hTemp);
 
  Serial.print(F("Humidity: "));
  Serial.print(h);
  Serial.print(F("%  Temperature: "));
  Serial.print(t);
  Serial.print("°C ");
  //Serial2.print(F("tTempC.txt="));
 
  //Serial.print("");
  //Serial.print(F("tHumidity.txt:\ "));
  //Serial.print(h);
  //Serial.write(0xff);
  //Serial.write(0xff);
  //Serial.write(0xff);
}

#include "NexDualStateButton.h" #include "Nextion.h"

#include "DHT.h"

#define DHTPIN 27 #define DHTTYPE DHT22

DHT dht(DHTPIN, DHTTYPE); int R1 = 2; uint32_t dual_state ;

NexText tTempC = NexText(0, 4, "tTempC"); NexText tHumidity = NexText(0, 6, "tHumidity"); NexDSButton bt0 = NexDSButton(0, 8, "bt0");

char buffer[100] = {0};

NexTouch *nex_listen_list[] = { &bt0, NULL };

void bt0PopCallback(void *ptr) { uint32_t dual_state; NexDSButton *btn = (NexDSButton *)ptr;

dbSerialPrintln("bt0PopCallback");
dbSerialPrint("ptr=");

dbSerialPrintln((uint32_t)ptr);
memset(buffer, 0, sizeof(buffer));

bt0.getValue(&dual_state);

if(dual_state>0) { digitalWrite(R1, LOW); } else { digitalWrite(R1, HIGH); }

} void setup(void) { dht.begin(); Serial.begin(9600); pinMode(R1, OUTPUT);

nexInit(); bt0.attachPop(bt0PopCallback, &bt0);

Serial.println("DHT Sensor Reading"); dbSerialPrintln("setup done");

}

void loop(void) {

nexLoop(nex_listen_list); float t = dht.readTemperature();

float h = dht.readHumidity();

if (isnan(h) || isnan(t)) { Serial2.println(F("Failed to read from DHT sensor!")); return; }

static char temperatureCTemp[10]; dtostrf(t, 6, 2, temperatureCTemp); tTempC.setText(temperatureCTemp);

char hTemp[10] = {0}; utoa(int(h), hTemp, 10); tHumidity.setText(hTemp);

Serial.print(F("Humidity: ")); Serial.print(h); Serial.print(F("% Temperature: ")); Serial.print(t); Serial.print("°C "); //Serial2.print(F("tTempC.txt="));

//Serial.print(""); //Serial.print(F("tHumidity.txt:\ ")); //Serial.print(h); //Serial.write(0xff); //Serial.write(0xff); //Serial.write(0xff);

}

#include "NexDualStateButton.h"
#include "Nextion.h"
#include "DHT.h"

#define DHTPIN 27
#define DHTTYPE DHT22

DHT dht(DHTPIN, DHTTYPE);
int R1 = 2;
uint32_t dual_state ;

NexText tTempC = NexText(0, 4, "tTempC");
NexText tHumidity = NexText(0, 6, "tHumidity");
NexDSButton bt0 = NexDSButton(0, 8, "bt0");

char buffer[100] = {0};
 
NexTouch *nex_listen_list[] =
{
    &bt0,
    NULL
};

void bt0PopCallback(void *ptr)
{
  uint32_t dual_state;
  NexDSButton *btn = (NexDSButton *)ptr;
   
  dbSerialPrintln("bt0PopCallback");
  dbSerialPrint("ptr=");
 
  dbSerialPrintln((uint32_t)ptr);
  memset(buffer, 0, sizeof(buffer));
   
  bt0.getValue(&dual_state);
 
  if(dual_state>0)
  {
    digitalWrite(R1, LOW);
  }
  else
  {
    digitalWrite(R1, HIGH);
  }
}

void setup(void) {
   dht.begin();
   Serial.begin(9600);
   pinMode(R1, OUTPUT);
 
   nexInit();
   bt0.attachPop(bt0PopCallback, &bt0);
   
   Serial.println("DHT Sensor Reading");
   dbSerialPrintln("setup done");
}

void loop(void) {
  nexLoop(nex_listen_list);
  float t = dht.readTemperature();
  float h = dht.readHumidity();
 
  if (isnan(h) || isnan(t)) {
    Serial2.println(F("Failed to read from DHT sensor!"));
    return;
  }
 
  static char temperatureCTemp[10];
  dtostrf(t, 6, 2, temperatureCTemp);
  tTempC.setText(temperatureCTemp);

  char hTemp[10] = {0};
  utoa(int(h), hTemp, 10);
  tHumidity.setText(hTemp);
 
  Serial.print(F("Humidity: "));
  Serial.print(h);
  Serial.print(F("%  Temperature: "));
  Serial.print(t);
  Serial.print("°C ");
  //Serial2.print(F("tTempC.txt="));
 
  //Serial.print("");
  //Serial.print(F("tHumidity.txt:\ "));
  //Serial.print(h);
  //Serial.write(0xff);
  //Serial.write(0xff);
  //Serial.write(0xff);
}
Source Link
Abhishekh Aaron
Abhishekh Aaron
  • 1
  • 3

To control the relay switching in nextion using esp32 Microcontroller

I have developed the code to control the relay switching on/off using nextion display and esp32. But whenever I press my dual state button in the nextion display there is some delay and I need to press my dual state button continuously in nextion display for about 10 to 15 seconds to switch on/off the relay.

I am stuck in this work and I 'm looking for help. I need to switch on/off the relay on a single tap on the dual sate button on nextion display. Below I have attached my code,

#include "NexDualStateButton.h" #include "Nextion.h"

#include "DHT.h"

#define DHTPIN 27 #define DHTTYPE DHT22

DHT dht(DHTPIN, DHTTYPE); int R1 = 2; uint32_t dual_state ;

NexText tTempC = NexText(0, 4, "tTempC"); NexText tHumidity = NexText(0, 6, "tHumidity"); NexDSButton bt0 = NexDSButton(0, 8, "bt0");

char buffer[100] = {0};

NexTouch *nex_listen_list[] = { &bt0, NULL };

void bt0PopCallback(void *ptr) { uint32_t dual_state; NexDSButton *btn = (NexDSButton *)ptr;

dbSerialPrintln("bt0PopCallback");
dbSerialPrint("ptr=");

dbSerialPrintln((uint32_t)ptr);
memset(buffer, 0, sizeof(buffer));

bt0.getValue(&dual_state);

if(dual_state>0) { digitalWrite(R1, LOW); } else { digitalWrite(R1, HIGH); }

} void setup(void) { dht.begin(); Serial.begin(9600); pinMode(R1, OUTPUT);

nexInit(); bt0.attachPop(bt0PopCallback, &bt0);

Serial.println("DHT Sensor Reading"); dbSerialPrintln("setup done");

}

void loop(void) {

nexLoop(nex_listen_list); float t = dht.readTemperature();

float h = dht.readHumidity();

if (isnan(h) || isnan(t)) { Serial2.println(F("Failed to read from DHT sensor!")); return; }

static char temperatureCTemp[10]; dtostrf(t, 6, 2, temperatureCTemp); tTempC.setText(temperatureCTemp);

char hTemp[10] = {0}; utoa(int(h), hTemp, 10); tHumidity.setText(hTemp);

Serial.print(F("Humidity: ")); Serial.print(h); Serial.print(F("% Temperature: ")); Serial.print(t); Serial.print("°C "); //Serial2.print(F("tTempC.txt="));

//Serial.print(""); //Serial.print(F("tHumidity.txt:\ ")); //Serial.print(h); //Serial.write(0xff); //Serial.write(0xff); //Serial.write(0xff);

}

Thanks in Advance.