Return to Question

EDIT: I found the report descriptor in Keyboard.cpp:

EDIT 1: This is the output I see from the code as shown (without the monitor "going crazy")

19:51:03.017 -> Serial Initialized
19:51:13.932 -> //Where I was hoping to see "a"

EDIT 2: I found the report descriptor in Keyboard.cpp:

Additionally, what does Serial.write(...) represent? I.e. when I close the Arduino IDE serial monitor, will my Arduino Micro automatically assume its HID function and write the data as an HID device?

I know there are already keyboard and mouse HID libraries but I already have code that generates the raw HID data that I would prefer to utilize. Note that the buffer described above comes from the HID report descriptor for a generic keyboard i.e. the "4" is not merely the ASCII code for "a". Explained Here

Additionally, what does Serial.write(...) represent? I.e. when I close the Arduino IDE serial monitor, will my Arduino Micro automatically assume its HID function and write the data as an HID device? S

I know there are already keyboard and mouse HID libraries but I already have code that generates the raw HID data that I would prefer to utilize. Note that the buffer described above comes from the HID report descriptor for a generic keyboard i.e. the "4" is not merely the ASCII code for "a". Explained Here Maybe I can use https://www.arduino.cc/en/Reference/HID ?

EDIT: I found the report descriptor in Keyboard.cpp:

  //  Keyboard
    0x05, 0x01,                    // USAGE_PAGE (Generic Desktop)  // 47
    0x09, 0x06,                    // USAGE (Keyboard)
    0xa1, 0x01,                    // COLLECTION (Application)
    0x85, 0x02,                    //   REPORT_ID (2)
    0x05, 0x07,                    //   USAGE_PAGE (Keyboard)
   
  0x19, 0xe0,                    //   USAGE_MINIMUM (Keyboard LeftControl)
    0x29, 0xe7,                    //   USAGE_MAXIMUM (Keyboard Right GUI)
    0x15, 0x00,                    //   LOGICAL_MINIMUM (0)
    0x25, 0x01,                    //   LOGICAL_MAXIMUM (1)
    0x75, 0x01,                    //   REPORT_SIZE (1)
    
  0x95, 0x08,                    //   REPORT_COUNT (8)
    0x81, 0x02,                    //   INPUT (Data,Var,Abs)
    0x95, 0x01,                    //   REPORT_COUNT (1)
    0x75, 0x08,                    //   REPORT_SIZE (8)
    0x81, 0x03,                    //   INPUT (Cnst,Var,Abs)
    
  0x95, 0x06,                    //   REPORT_COUNT (6)
    0x75, 0x08,                    //   REPORT_SIZE (8)
    0x15, 0x00,                    //   LOGICAL_MINIMUM (0)
    0x25, 0x73,                    //   LOGICAL_MAXIMUM (115)
    0x05, 0x07,                    //   USAGE_PAGE (Keyboard)
    
  0x19, 0x00,                    //   USAGE_MINIMUM (Reserved (no event indicated))
    0x29, 0x73,                    //   USAGE_MAXIMUM (Keyboard Application)
    0x81, 0x00,                    //   INPUT (Data,Ary,Abs)
    0xc0,                          // END_COLLECTION

I will need to compare this to the data I would be sending to Keyboard.write()