Return to Question

added 192 characters in body

Source Link

edited Aug 4, 2020 at 7:25

byte b;
int out;
int D3 = 3;int D4 = 4;int D5 = 5;int D6 = 6;int D7 = 7;int D8 = 8;
void setup() {
  Serial.begin(9600);
  pinMode(out, OUTPUT);
  digitalWrite(D3, LOW);digitalWrite(D4, LOW);digitalWrite(D5, LOW);digitalWrite(D6, LOW);digitalWrite(D7, LOW);digitalWrite(D8, LOW);
 
  
}

void loop() {
  while (Serial.available() == 0) {}
  b = Serial.read() - 48;
  out = b;
  Serial.print("\n Out is ");
  Serial.println(out);
  digitalWrite(out, HIGH);
  delay(600);
 if (digitalRead(D3) == HIGH)
{
   Serial.print("D3 HIGH");
}
 if (digitalRead(D4) == HIGH)
{
   Serial.print("D4 HIGH");}
 if (digitalRead(D5) == HIGH)
{
   Serial.print("D5 HIGH");
} 
 if (digitalRead(D6) == HIGH)
{
   Serial.print("D6 HIGH");
   }
 if (digitalRead(D7) == HIGH)
{
   Serial.print("D7 HIGH");
}
 if (digitalRead(D8) == HIGH)
{
   Serial.print("D8 HIGH");
   }
  digitalWrite(out, LOW);
  delay(1000);
  
  

 
}

int out; int D3 = 3;int D4 = 4;int D5 = 5;int D6 = 6;int D7 = 7;int D8 = 8; void setup() { Serial.begin(9600); pinMode(out, OUTPUT); digitalWrite(D3, LOW);digitalWrite(D4, LOW);digitalWrite(D5, LOW);digitalWrite(D6, LOW);digitalWrite(D7, LOW);digitalWrite(D8, LOW);

}

void loop() { while (Serial.available() == 0) {} b = Serial.read() - 48; out = b; Serial.print("\n Out is "); Serial.println(out); digitalWrite(out, HIGH); delay(600); if (digitalRead(D3) == HIGH) { Serial.print("D3 HIGH"); } if (digitalRead(D4) == HIGH) { Serial.print("D4 HIGH");} if (digitalRead(D5) == HIGH) { Serial.print("D5 HIGH"); } if (digitalRead(D6) == HIGH) { Serial.print("D6 HIGH"); } if (digitalRead(D7) == HIGH) { Serial.print("D7 HIGH"); } if (digitalRead(D8) == HIGH) { Serial.print("D8 HIGH"); } digitalWrite(out, LOW); delay(1000);

}

byte b;

}

byte b;
int out;
int D3 = 3;int D4 = 4;int D5 = 5;int D6 = 6;int D7 = 7;int D8 = 8;
void setup() {
  Serial.begin(9600);
  pinMode(out, OUTPUT);
  digitalWrite(D3, LOW);digitalWrite(D4, LOW);digitalWrite(D5, LOW);digitalWrite(D6, LOW);digitalWrite(D7, LOW);digitalWrite(D8, LOW);
 
  
}

void loop() {
  while (Serial.available() == 0) {}
  b = Serial.read() - 48;
  out = b;
  Serial.print("\n Out is ");
  Serial.println(out);
  digitalWrite(out, HIGH);
  delay(600);
 if (digitalRead(D3) == HIGH)
{
   Serial.print("D3 HIGH");
}
 if (digitalRead(D4) == HIGH)
{
   Serial.print("D4 HIGH");}
 if (digitalRead(D5) == HIGH)
{
   Serial.print("D5 HIGH");
} 
 if (digitalRead(D6) == HIGH)
{
   Serial.print("D6 HIGH");
   }
 if (digitalRead(D7) == HIGH)
{
   Serial.print("D7 HIGH");
}
 if (digitalRead(D8) == HIGH)
{
   Serial.print("D8 HIGH");
   }
  digitalWrite(out, LOW);
  delay(1000);
  
  

 
}

Source Link

asked Aug 4, 2020 at 7:17

Mochammad Farid

inconsistent digital output on simple code

so im new on arduino coding, and i made this code, where i input from serial monitor and then use it as a command for digital write. the problem is, sometimes the code work perfectly but then when i input 4, both D3 ad D4 is high and that also happens in D5 and D6. but its inconsistent, and i also print the 'out' value and also which digital pin is high to make it easier.

byte b;

}

does anyone know why this happens? or can anyone recommend another method to do what im tryinng to do? thank you guys!!!