- Added smoke sensor dust level information for EN54 fire detectors. This information will become available if the hub runs Malevich OS 2.43. - Minor fixes improving app performance.

- Scenarios for third-party devices connected via Takeover Module. Intrusion, fire, and leakage detectors can trigger scenarios by alarm, key fobs can control automation devices. For opening detectors, added chime sounds via a siren for opening and tilt events. Available on OS Malevich 2.42+. - For Hub BP Jeweller, added a separate activity period after a hub or any device lid state change in battery saving mode, allowing system servicing after a tamper alarm. Available on OS Malevich 2.43+.

- A local alarm feature for EN54 fire systems in multi-apartment buildings. It allows users to configure building-wide alarm delays to prevent false alarms and unnecessary evacuations. Available for fire hubs running OS Malevich 2.42 or later. - Minor fixes improving app performance.

- Support for new devices that will become available soon, and minor fixes improving app performance. - Radio signal test for EN 54 fire devices: displays the exact signal strength value (dB) at a specific location. It is also possible to download the relevant report on the results. Requires hub with OS Malevich 2.40 or later.

- Support for new devices that will become available soon, and minor fixes improving app performance.

- Ability to update firmware on multiple video surveillance devices simultaneously. To do this, go to space settings, ‘Video update center’ menu. - Line crossing notifications from video devices now include the type of object that crossed the line.

A new OSD (on-screen display) feature is now available for video camera streams. You can overlay recording date, time, or custom text on the video. To enable this feature, make sure your cameras are updated to the latest available firmware version.

- Support for new devices that will become available soon, and minor fixes improving app performance.

- For wired devices connected to integration modules, added the ‘Event sending interval’ setting which controls the minimum time between notifications sent by these devices. Available in wired device settings on hubs running OS Malevich 2.40. - For LifeQuality, added the option to configure alarm notifications when air quality goes beyond the set limits.

- Bulk access management: ability to configure access for multiple users and devices (motion detectors and voice modules) at once. Available to Privacy managers in the ‘Privacy’ menu.

- Expanded permissions for non-admin users and PROs: they can now manage notification settings while the system is armed, create arming/disarming scenarios by schedule, and change rooms for non-monitored devices. Relevant permissions must be granted by admin or PRO with appropriate rights. - Fixed an issue where automation devices could not be opened from the control screen.

- Hubs running OS Malevich 2.39 now support temporary logging via cellular — collects system data when issues occur without constant traffic usage. Available in hub settings, Services — 'Hub system logging' menu. - For Group mode, added a setting that can limit device and notification visibility for users — they will only see what they have access to. The new option is available in space settings, Groups menu.

- Support for new devices that will become available soon, and minor fixes improving app performance.

- Added the ability to grant users access to playback to and download audio recordings from voice modules. This access can be granted by Privacy managers in ‘Privacy’ section of the space settings.

- Users with rights can now grant extended permissions for users without system configuration rights (change space settings, invite users, manage scenarios and devices). Available with OS Malevich 2.38. - Bulk access management: Ability to configure access for multiple users and devices (cameras, motion detectors) at once. Available to Privacy managers in the ‘Privacy’ menu. - Ability to start exit delay from outdoor keypad. Available with OS Malevich 2.38.

Automation for EN54 Fire Hub: added dedicated scenarios to streamline fire safety workflows (requires OS Malevich 2.36).

- Support for new devices that will become available soon, and minor fixes improving app performance.

- For systems with native water shutoff valve and leakage detector, added ‘Leakage response’ setting. When enabled in valve settings, in case of leakage, system allows only closing the valve and blocks control of it until leak is resolved. Available with OS Malevich 2.36. - Automation devices can now be triggered by pressing the doorbell button if the doorbell is added to the hub. The scenario can be created in automation device settings — Scenarios — By alarm. Available with OS Malevich 2.35.

Fixed an issue where automation devices in pulse mode could fail to activate when triggered from the in-app automation screen.

- Support for new devices that will become available soon, and minor fixes improving app performance.

- Minor fixes improving app performance.

- For native video devices: notifications of line crossing within camera’s field of view. Lines are configured in Detection menu, notifications — in ‘Notifications from camera detectors’ menu. Available from version 2.532 for cameras and 2.547 for video recorders. - Automatic detection of devices that trigger excessive alarms: if a device sends 100+ alarms within an hour, users receive a specific notification.

- Doorbell can now call your phone when someone presses the doorbell button (permission is enabled in user’s settings). - Ability to define which types of notifications in the feed are available to specific users (specified in user settings). - EN-54 devices can act as triggers in alarm scenarios. Support with OS Malevich 2.35 firmware version.

- Doorbell can now call your phone when someone presses the doorbell button. You can enable this option in User settings → Notification settings → Doorbell button press. - Also, when you view and zoom video from cameras, you’ll see a thumbnail of the full frame with the marked viewing area. - Additionally, it’s now possible to define which types of notifications in the feed are available to specific users. This can be configured in space settings, ‘Users menu → user account. - Fire safety automation: EN-54 devices can act as triggers in alarm scenarios. Support with hub OS Malevich 2.35 firmware version.

- Minor fixes improving app performance.