Skip to main content
deleted 18 characters in body
Source Link
sdgfsdh
  • 907
  • 3
  • 13
  • 19

I recently cut my carbon fork steerer and it is a few mms too short for my desired spacer arrangement. If it was a little bit higher, then I could move a spacer from above the stem to below the stem.

My expander plug sits 1mm above the top of the steerer column. IfIt occurred to me that if it were a few mms higher then it would effectively extend the fork and I would be able to add another spacer.

Are there slightly taller expanders available?

The arrow points to the bit that should be taller

I recently cut my carbon fork steerer and it is a few mms too short for my desired spacer arrangement. If it was a little bit higher, then I could move a spacer from above the stem to below the stem.

My expander plug sits 1mm above the top of the steerer column. If it were a few mms higher then it would effectively extend the fork and I would be able to add another spacer.

Are there slightly taller expanders available?

The arrow points to the bit that should be taller

I recently cut my carbon fork steerer and it is a few mms too short for my desired spacer arrangement. If it was a little bit higher, then I could move a spacer from above the stem to below the stem.

My expander plug sits 1mm above the top of the steerer column. It occurred to me that if it were a few mms higher then I would be able to add another spacer.

Are there slightly taller expanders available?

The arrow points to the bit that should be taller

Source Link
sdgfsdh
  • 907
  • 3
  • 13
  • 19

Are taller carbon fork expander plugs available?

I recently cut my carbon fork steerer and it is a few mms too short for my desired spacer arrangement. If it was a little bit higher, then I could move a spacer from above the stem to below the stem.

My expander plug sits 1mm above the top of the steerer column. If it were a few mms higher then it would effectively extend the fork and I would be able to add another spacer.

Are there slightly taller expanders available?

The arrow points to the bit that should be taller