Sub-GHz · IR · WiFi · Bluetooth Testing Tool
ESP32-S3 + WT32-SC01-PLUS + CC1101 + IR LED

Flash WaveSentinel directly from your browser — no tools required.

Launch Web Flasher

Requires Chrome or Edge on desktop. Connect your WT32-SC01-PLUS via USB, click Install, and select the serial port.

• Capture & Playback — Record and retransmit RF signals (300-928 MHz)
• Frequency Scanner — Sweep and detect active frequencies
• Protocol Analyzer — Real-time identification: Princeton, KeeLoq, CAME, Nice FLO, GateTX, Linear, and more
• Signal Generator — Transmit on configurable frequency, modulation, and data rate
• Flipper .sub Compatible — Load, save, and play Flipper Zero sub-files from SD card
• Tesla Charge Port — US and EU signal emulation
• RCSwitch Types A–D — DIP switch, rotary/sliding, Intertechno, and REV remote control transmit
• RAW TX — Send raw codes with configurable frequency, bit length, pulse length, protocol, and repeat count
• TouchTunes Remote — Wireless jukebox control with full command set
• Universal Remote — 35-button programmable remote (Numbers, Nav, Media tabs). Assign any .sub (RF) or .ir (IR) file to any button, save/load profiles to SD card. Brand browser with category/brand/file/signal dropdowns for Flipper-IRDB files
• Full CC1101 Config — Frequency, modulation, bandwidth, deviation, data rate, TX power, sync mode, packet format

• IR Transmit — Send IR signals via LED on GPIO 21 (NEC, Samsung, Sony, RC5, RC6, Panasonic, LG, JVC, Sharp + raw)
• Flipper .ir Compatible — Load and transmit Flipper Zero IR files from SD card (parsed and raw signal types)
• Brand Browser — Navigate IR files by category and brand (e.g., TVs → Samsung → Power). Supports Flipper-IRDB folder structure

• Network Scanner — Scan and inspect nearby access points
• WiFi Join — Connect to networks with on-screen QWERTY keyboard, credentials saved to NVS
• Beacon Flood — Broadcast fake SSIDs (random, rickroll, funny names)
• Deauth — 802.11 deauthentication frame testing
• Packet Sniffer — Promiscuous mode with packet stats and probe request capture
• OTA Updates — Over-the-air firmware updates via built-in web server

• BLE Spam — Advertisement flooding (Apple, Android, Samsung, Windows, Google)
• BLE Scanner — Discover nearby BLE devices with name, MAC, and RSSI

• 3.5" Capacitive Touchscreen — Full touch-driven LVGL interface, no buttons needed
• Status Bar — Persistent WiFi and battery icons across all screens
• SD Card — Save/load captures, presets, remote profiles, and Flipper .sub files
• I2S Audio — Sound output via DAC
• TouchTunes Remote — Wireless jukebox control with full command set

CC1101:  MISO=11  MOSI=10  SCLK=14  CS=12  GDO0=13   (SPI2/FSPI)
SD Card: MISO=38  MOSI=40  SCLK=39  CS=41             (SPI3/HSPI)
IR LED:  GPIO=21
I2S:     BCLK=36  LRC=35   DOUT=37
Display: 8-bit parallel bus  RST=4  BL=45
Touch:   SDA=6  SCL=5  INT=7  (I2C @ 0x38)

• PlatformIO (CLI or VS Code extension)
• USB-C cable

# Clone
git clone https://github.com/OzInFl/WaveSentinel-refactored2.git
cd WaveSentinel-refactored2

# Build
pio run

# Flash via USB
pio run --target upload

Core 0: LVGL display refresh (5ms timer)
Core 1: Main loop state machine — RF, WiFi, BLE operations

All LVGL calls from Core 1 are protected by a FreeRTOS mutex. The state machine in main.cpp drives 24 operational states across RF capture/playback, IR transmit, WiFi scanning/attack, BLE operations, universal remote, and more.

For educational and authorized security research purposes only.

_{Built with ESP-IDF + Arduino + LVGL + LovyanGFX}