fby3.5: bb: Support fan control#241
Closed
DelphineChiu wants to merge 13 commits into
Closed
Conversation
Summary: - Support MP5990 sensor device Test Plan: 1. Build code: pass 2. [MPS] Check GPIOA7 and the MP5990 configure register(38h and 46h) 3. [MPS] Get MP5990 sensor reading: pass 4. [ADI] Get ADM1278 sensor reading: pass Log: 1. Class type: class-1, 1ou present status: false, 2ou present status: true, board revision: EVT3(EFUSE) root@bmc-oob:/root# bic-util slot1 --get_gpio|grep "HSC_SET_EN_R" 7 HSC_SET_EN_R: 1 root@bmc-oob:/root# bic-util slot1 0x18 0x52 0x5 0x16 0x2 0x38 BF 01 root@bmc-oob:/root# bic-util slot1 0x18 0x52 0x5 0x16 0x2 0x46 46 00 root@bmc-oob:/root# sensor-util slot1|grep HSC HSC Temp (0xE) : 25.00 C | (ok) HSC Input Vol (0x29) : 12.31 Volts | (ok) HSC Output Cur (0x30) : 0.25 Amps | (ok) HSC Input Pwr (0x39) : 0.00 Watts | (ok) 2. Class type: class-1, 1ou present status: false, 2ou present status: false, board revision: EVT3(EFUSE) root@bmc-oob:/root# bic-util slot1 --get_gpio|grep "HSC_SET_EN_R" 7 HSC_SET_EN_R: 0 root@bmc-oob:/root# bic-util slot1 0x18 0x52 0x5 0x16 0x2 0x46 28 00 root@bmc-oob:/root# bic-util slot1 0x18 0x52 0x5 0x16 0x2 0x38 04 01 root@bmc-oob:/root# sensor-util slot1|grep HSC HSC Temp (0xE) : 25.00 C | (ok) HSC Input Vol (0x29) : 12.44 Volts | (ok) HSC Output Cur (0x30) : 0.25 Amps | (ok) HSC Input Pwr (0x39) : 0.00 Watts | (ok) 3. Class type: class-1, 1ou present status: false, 2ou present status:false, board revision: POC root@bmc-oob:/root# sensor-util slot3|grep HSC HSC Temp (0xE) : 27.62 C | (ok) HSC Input Vol (0x29) : 12.00 Volts | (ok) HSC Output Cur (0x30) : 10.52 Amps | (ok) HSC Input Pwr (0x39) : 129.35 Watts | (ok)
Summary: - K_WORK_DELAYABLE_DEFINE needs a callback function with the function parameter type of "struct k_work *". - util_spi.c had a missing header that needed to be included as well as an improperly formatted print statement. - Mark card_type_1ou that is currently unused in Yv3.5 CL as unused to silence compiler warnings. - Initialized status in fall through case. Test Plan: - Build code: Pass
Summary: - Support TMP431 sensor device For EVT3 ADI system, the "HSC Temp" and "MB Outlet Temp" should be read from TMP431 chip. For EVT3 MPS system, the "HSC Temp" sensor value is read from MP5990 and "MB Outlet Temp" is read from TMP75. Test Plan: 1. Build code: pass 2. [EVT3 MPS] Check "HSC Temp" and "MB Outlet Temp" sensor reading: pass 3. [EVT3 ADI] Check "HSC Temp" and "MB Outlet Temp" sensor reading: pass 4. [POC] Check "HSC Temp" and "MB Outlet Temp" sensor reading: pass Log: 1. Class type: class-1, 1ou present status: false, 2ou present status: true, board revision: EVT3(ADI) root@bmc-oob:~# sensor-util slot1|grep "HSC\|MB Outlet Temp" MB Outlet Temp (0x2) : 25.44 C | (ok) HSC Temp (0xE) : 23.81 C | (ok) HSC Input Vol (0x29) : 12.00 Volts | (ok) HSC Output Cur (0x30) : 0.28 Amps | (ok) HSC Input Pwr (0x39) : 3.53 Watts | (ok) 2. Class type: class-1, 1ou present status: false, 2ou present status: false, board revision: EVT3(MPS) root@bmc-oob:~# sensor-util slot1|grep "HSC\|MB Outlet Temp" MB Outlet Temp (0x2) : 24.00 C | (ok) HSC Temp (0xE) : 25.00 C | (ok) HSC Input Vol (0x29) : 12.22 Volts | (ok) HSC Output Cur (0x30) : 0.25 Amps | (ok) HSC Input Pwr (0x39) : 6.00 Watts | (ok) 3. Class type: class-1, 1ou present status: false, 2ou present status:false, board revision: POC root@bmc-oob:~# sensor-util slot3|grep "HSC\|MB Outlet Temp" MB Outlet Temp (0x2) : 33.00 C | (ok) HSC Temp (0xE) : 29.52 C | (ok) HSC Input Vol (0x29) : 12.00 Volts | (ok) HSC Output Cur (0x30) : 8.82 Amps | (ok) HSC Input Pwr (0x39) : 108.70 Watts | (ok)
Summary: - Add Zephyr Kernel patches 1. drivers: ipmb: Extend the ipmb buffer 2. drivers: i2c: Correct the timeout time as 35ms 3. peci: aspeed: Avoid race condition of accessing peci device. Test Plan: 1. Build code: pass
Summary: - In order to avoid lost post code , modify get/send post code stop time from post complete to host power off. - Modify get/send post code reference signal. Test Plan: - Build code: Pass - Test DC cycle/reset/BIC reboot: Pass Log: Before modify get/send post code stop time root@bmc-oob:~# bic-util slot1 --get_post_code util_get_postcode: returns 244 bytes 92 92 92 92 92 92 92 92 99 92 98 97 92 92 92 92 92 92 92 92 92 91 99 92 92 92 92 92 92 92 92 EF 96 95 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 94 92 91 79 70 68 61 4F 47 42 41 41 7F 00 00 15 0D 0C 0B 06 04 00 50 22 02 23 03 EE ED EC EB E9 E6 AF AF AF BF 7E C6 CE BC BC BC BC BC CC 7E DC CA CA B7 7E 70 7E D1 7E D1 7E D0 7E D0 7E D0 7E 7E BB BB BB BB BB BB BB BB BB BB CB 7E 70 70 70 B9 BA DB D9 DA C9 D7 B8 B8 B8 B8 B8 B8 B8 B8 B8 B7 B7 B7 B7 B7 B7 B7 B7 B9 70 D6 D2 7E D2 7E 7E BE BE 7E B7 70 70 7E 70 7E B7 B7 B6 B6 B7 B7 7E 7E 7E B6 B6 B7 B0 B6 B6 B6 B3 B3 B3 B3 B3 B3 B3 C6 B2 C5 B8 7E B4 7E B6 B1 B1 B1 7E 7E 70 7E C2 7E B1 B1 70 C1 7E B0 CD 73 7E CF 7E B5 B0 AF AF E5 E3 E4 E1 E0 E0 E0 AE AA A8 A9 A9 A7 A7 A7 A2 A2 A9 A9 After modify get/send post code stop time root@bmc-oob:~# bic-util slot1 --get_post_code util_get_postcode: returns 244 bytes 9C 9C 00 E3 E3 E3 AA 84 B1 AD D9 AD D9 AD 92 92 92 92 92 99 92 98 97 92 92 92 92 92 92 91 99 92 92 92 92 92 EF 96 95 94 94 94 94 94 94 94 94 94 94 94 94 94 92 91 79 70 68 61 4F 47 42 41 40 7F 00 7F 15 0D 0C 0C 06 04 00 50 22 02 23 03 EE ED EC EB E9 E7 E6 AF AF AF BF 7E C6 CE BC BC BC BC BC CC 7E DC CA CA B7 7E 70 7E D1 7E D1 7E D0 7E D0 7E D0 7E 7E BB BB BB BB BB BB BB BB BB BB CB 7E 70 70 70 B9 BA DB D9 DA C9 D7 B8 B8 B8 B8 B8 B8 B8 B8 B8 B7 B7 B7 B7 B7 B7 B7 B7 B9 70 D6 D2 7E D2 7E 7E BE BE 7E B7 70 70 7E 70 7E B7 B7 B6 B6 B7 B7 7E 7E 7E B6 B6 B7 B0 B6 B6 B6 B3 B3 B3 B3 B3 B3 B3 C6 B2 C5 B8 7E B4 7E B6 B1 B1 B1 7E 7E 70 7E C2 7E B1 B1 70 C1 7E B0 CD 73 7E CF 7E BF B0 AF AF E5 E3 E4 E1 E0 E0 E0 AE AA A8 A9 A9 A7 A7 A7 A2 A2 A9 A9
Summary: - Fix BB BIC can't reset problem. The root cause is that Zephyr SDK04 change the wdt of dts architecture. If we don't enable wdt0 before, the kernel won't find wdt1. Test plan: - Build code: Pass - Warm reset: Pass - Cold reset: Pass Log: 1. Check warm reset can do successfully. - Before fix [BIC console] uart:~$ kernel reboot warm No device named wdt1. Failed to reboot: spinning endlessly... - After fix [BIC console] uart:~$ kernel reboot warm0)I00:00:00.000,000] <inf> usb_dc_aspeed: select ep[0x81] as IN endpoint [00:00:00.000,000] <inf> usb_dc_aspeed: select ep[0x82] as IN endpoint [00:00:00.000,000] <wrn> usb_dc_aspeed: pre-selected ep[0x1] as IN endpoint [00:00:00.000,000] <wrn> usb_dc_aspee*** Booting Zephyr OS build v00.01.04-3-g32eed3dd510b *** Hello, wellcome to yv35 baseboard 2022.1.1 ... 2. Check cold reset can do successfully. - Before fix [BIC console] uart:~$ kernel reboot cold No device named wdt1. Failed to reboot: spinning endlessly... - After fix [BIC console] uart:~$ kernel reboot cold0)I00:00:00.000,000] <inf> usb_dc_aspeed: select ep[0x81] as IN endpoint [00:00:00.000,000] <inf> usb_dc_aspeed: select ep[0x82] as IN endpoint [00:00:00.000,000] <wrn> usb_dc_aspeed: pre-selected ep[0x1] as IN endpoint [00:00:00.000,000] <wrn> usb_dc_aspee*** Booting Zephyr OS build v00.01.04-3-g32eed3dd510b *** Hello, wellcome to yv35 baseboard 2022.1.1 ...
Summary: - Added event log for memory thermal trip assert event. Test Plan: - Build code: Pass Log: Memory thermal trip event [BIC console] uart:~$ gpio get GPIO0_E_H 26 Reading GPIO0_E_H pin 26 Value 1 uart:~$ gpio conf GPIO0_E_H 26 out Configuring GPIO0_E_H pin 26 uart:~$ gpio get GPIO0_E_H 26 Reading GPIO0_E_H pin 26 Value 0 uart:~$ gpio get GPIO0_A_D 20 Reading GPIO0_A_D pin 20 Value 1 uart:~$ gpio conf GPIO0_A_D 20 out Configuring GPIO0_A_D pin 20 uart:~$ gpio get GPIO0_A_D 20 Reading GPIO0_A_D pin 20 Value 0 [BMC console] root@bmc-oob:~# log-util slot1 --print SEL Entry: FRU: 1, Record: Standard (0x02), Time: 2022-03-31 00:34:09, Sensor: SYSTEM_STATUS (0x10), Event Data: (11FFFF) CPU/Memory thermal trip Assertion SOC thermal trip event [BIC console] uart:~$ gpio get GPIO0_E_H 26 Reading GPIO0_E_H pin 26 Value 1 uart:~$ gpio get GPIO0_A_D 20 Reading GPIO0_A_D pin 20 Value 1 uart:~$ gpio conf GPIO0_A_D 20 out Configuring GPIO0_A_D pin 20 uart:~$ gpio get GPIO0_A_D 20 Reading GPIO0_A_D pin 20 Value 0 [BMC console] root@bmc-oob:~# log-util slot1 --print SEL Entry: FRU: 1, Record: Standard (0x02), Time: 2022-03-31 00:35:09, Sensor: SYSTEM_STATUS (0x10), Event Data: (00FFFF) SOC thermal trip Assertion
facebook-github-bot
added
the
CLA Signed
Author
|
Dependency: #240 |
This was referenced Apr 18, 2022
Contributor
|
@GoldenBug has imported this pull request. If you are a Meta employee, you can view this diff on Phabricator. |
Summary: - Add OEM command to read and write BIC register Test Plan: - Build Code: Pass - Command Test: Pass Log: read register 0x7e7b0300 [BIC console] uart:~$ md 0x7e7b0300 [7e7b0300] 00000001 [BMC console] root@bmc-oob:~# bic-util slot1 0xe0 0x68 0x9c 0x9c 0x00 0x00 0x03 0x7b 0x7e 0x4 9C 9C 00 01 00 00 00 write 2 bytes 0x2211 to register 0x7e7b0300 [BMC console] root@bmc-oob:~# bic-util slot1 0xe0 0x69 0x9c 0x9c 0x00 0x00 0x03 0x7b 0x7e 0x2 0x11 0x22 9C 9C 00 read register 0x7e7b0300 [BIC console] uart:~$ md 0x7e7b0300 [7e7b0300] 00002211 [BMC console] root@bmc-oob:~# bic-util slot1 0xe0 0x68 0x9c 0x9c 0x00 0x00 0x03 0x7b 0x7e 0x4 9C 9C 00 11 22 00 00
Summary: - Fix BB IPMB TX/RX threads can't malloc successfully problem. Test plan: 1. Check BB IPMB is normal. - Get BB fw version root@bmc-oob:~# fw-util slot1 --version bb_bic BB Bridge-IC Version: oby35-bb-v2022.01.01 - Get BB device ID root@bmc-oob:~# bic-util slot1 0xe0 0x2 0x9c 0x9c 0x0 0x10 0x18 0x01 9C 9C 00 10 07 01 00 00 80 01 01 02 BF 9C 9C 00 00 00 00 00 00 00 2. Check CL IPMB is normal. - Get CL fw version root@bmc-oob:~# fw-util slot1 --version bic SB Bridge-IC Version: oby35-cl-v2022.06.51 - Get CL device ID root@bmc-oob:~# bic-util slot1 0x18 0x01 00 80 11 06 02 BF 9C 9C 00 00 00 00 00 00 00
Summary: - Enable baseboard USB and let BMC can scan BB USB. Test plan: - Build code: Pass - Scan USB: Pass Log: 1. Check BB USB can be scan by BMC. - Before enable root@bmc-oob:~# lsusb Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1d6b:0104 Linux Foundation Multifunction Composite Gadget Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub - After enable root@bmc-oob:~# lsusb Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 1d6b:0104 Linux Foundation Multifunction Composite Gadget Bus 001 Device 003: ID 1d6b:0104 Linux Foundation Multifunction Composite Gadget Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Summary:
- Add platform commands for development/debug usage.
- Should send command via BIC console with keyword "platform".
Test plain:
- Build code: Pass
- Test console command: Pass
Log:
[BIC console]
uart:~$ platform
platform - Platform commands
Subcommands:
note :Note list.
gpio :GPIO relative command.
sensor :SENSOR relative command.
uart:~$ platform note
========================{SHELL COMMAND INFO}========================================
* NAME: Platform command
* DESCRIPTION: Commands that could be used to debug or validate.
* DATE/VERSION: none
* CHIP/OS: AST1030 - Zephyr
* Note: none
========================{SHELL COMMAND INFO}========================================
uart:~$ platform gpio
gpio - GPIO relative command.
Subcommands:
list_group :List all GPIO config from certain group.
list_all :List all GPIO config.
get :Get GPIO config
set :Set GPIO config
multifnctl :List all GPIO multi-function control regs.
uart:~$ platform gpio list_group GPIO0_A_D
[0 ][GPIO0_A_D 0 ] FM_BMC_PCH_SCI_LPC_R_N : OD | output(I) | 1(1)
[1 ][GPIO0_A_D 1 ] FM_BIOS_POST_CMPLT_BMC_N : OD | input (I) | 0(0)
[2 ][GPIO0_A_D 2 ] FM_SLPS3_PLD_N : PP | input (I) | 1(1)
[3 ][GPIO0_A_D 3 ] IRQ_BMC_PCH_SMI_LPC_R_N : OD | output(I) | 1(1)
[4 ][GPIO0_A_D 4 ] IRQ_UV_DETECT_N : OD | input (I) | 1(1)
[5 ][GPIO0_A_D 5 ] FM_UV_ADR_TRIGGER_EN_R : OD | output(I) | 1(1)
[6 ][GPIO0_A_D 6 ] IRQ_SMI_ACTIVE_BMC_N : OD | input (I) | 1(1)
[7 ][GPIO0_A_D 7 ] HSC_SET_EN_R : PP | output(O) | 0(0)
[8 ][GPIO0_A_D 8 ] FM_BIC_RST_RTCRST_R : PP | output(O) | 0(0)
[9 ][GPIO0_A_D 9 ] RST_USB_HUB_N_R : OD | output(I) | 1(1)
[10 ][GPIO0_A_D 10 ] A_P3V_BAT_SCALED_EN_R : PP | output(O) | 0(0)
[11 ][GPIO0_A_D 11 ] FM_SPI_PCH_MASTER_SEL_R : PP | output(O) | 0(0)
[12 ][GPIO0_A_D 12 ] FM_PCHHOT_N : OD | input (I) | 1(1)
[13 ][GPIO0_A_D 13 ] FM_SLPS4_PLD_N : PP | input (I) | 1(1)
[14 ][GPIO0_A_D 14 ] FM_S3M_CPU0_CD_INIT_ERROR : OD | input (O) | 0(0)
[15 ][GPIO0_A_D 15 ] PWRGD_SYS_PWROK : PP | input (I) | 1(1)
[16 ][GPIO0_A_D 16 ] FM_HSC_TIMER : OD | input (I) | 0(0)
[17 ][GPIO0_A_D 17 ] IRQ_SMB_IO_LVC3_STBY_ALRT_N : OD | input (I) | 1(1)
[18 ][GPIO0_A_D 18 ] IRQ_CPU0_VRHOT_N : OD | input (I) | 1(1)
[19 ][GPIO0_A_D 19 ] DBP_CPU_PREQ_BIC_N : OD | output(I) | 1(1)
[20 ][GPIO0_A_D 20 ] FM_CPU_THERMTRIP_LATCH_LVT3_N : OD | input (I) | 1(1)
[21 ][GPIO0_A_D 21 ] FM_CPU_SKTOCC_LVT3_PLD_N : OD | input (I) | 0(0)
[22 ][GPIO0_A_D 22 ] H_CPU_MEMHOT_OUT_LVC3_N : PP | input (I) | 1(1)
[23 ][GPIO0_A_D 23 ] RST_PLTRST_PLD_N : PP | input (I) | 1(1)
[24 ][GPIO0_A_D 24 ] PWRBTN_N : OD | input (I) | 1(1)
[25 ][GPIO0_A_D 25 ] RST_BMC_R_N : OD | output(I) | 1(1)
[26 ][GPIO0_A_D 26 ] H_BMC_PRDY_BUF_N : OD | input (I) | 1(1)
[27 ][GPIO0_A_D 27 ] BMC_READY : PP | output(O) | 1(1)
[28 ][GPIO0_A_D 28 ] BIC_READY : PP | output(O) | 1(1)
[29 ][GPIO0_A_D 29 ] FM_SOL_UART_CH_SEL_R : PP | input (I) | 1(1)
[30 ][GPIO0_A_D 30 ] HSC_MUX_SWITCH_R : PP | output(O) | 0(0)
[31 ][GPIO0_A_D 31 ] FM_FORCE_ADR_N_R : OD | output(I) | 1(1)
uart:~$ platform gpio get 1
[1 ] FM_BIOS_POST_CMPLT_BMC_N : OD | input (I) | 0(0)
uart:~$ platform gpio get 60
gpio[60] get failed!
uart:~$ platform gpio get 59
[59 ] FM_CPU_BIC_PROCHOT_LVT3_N : PP | input (I) | 1(1)
uart:~$ platform gpio set
set - Set GPIO config
Subcommands:
val :Set pin value.
int_type :Set interrupt pin type.
uart:~$ platform gpio set val 99 0
gpio[99] --> 0 ,success!
uart:~$ platform gpio get 99
[99 ] Reserve_GPIOM3 : OD | output(O) | 0(0)
uart:~$ platform gpio set val 99 1
gpio[99] --> 1 ,success!
uart:~$ platform gpio get 99
[99 ] Reserve_GPIOM3 : OD | output(I) | 1(1)
uart:~$ platform gpio set int_type
Help: platform gpio set int_type <gpio_idx> <type>
type: [0]disable [1]edge-rise [2]edge-fall [3]edge-both [4]low [5]high
uart:~$ platform gpio set int_type 99 0
gpio[99] --> type[0] success!
uart:~$ platform gpio multifnctl
[ REG ] hi lo
[0x7e6e2410] 0000 0000 0000 0000 0000 0000 0000 0000
[0x7e6e2414] 1111 0000 0000 0000 0000 0000 0000 0000
[0x7e6e2418] 0000 0011 0000 0000 0011 1111 1111 1111
[0x7e6e241c] 0011 1111 1111 1111 1111 0000 0000 0000
[0x7e6e2430] 0000 0000 0000 0110 0000 1100 0000 0000
[0x7e6e2434] 0000 0000 1111 1111 0000 0000 0000 0000
[0x7e6e2438] 0000 0000 0000 0000 0011 1000 0000 0000
[0x7e6e2450] 0000 0000 0000 0000 1010 0000 0000 0000
[0x7e6e2454] 0000 0000 0000 0000 0000 0000 0000 0000
[0x7e6e2458] 0000 0000 0000 0000 0000 0101 0000 0000
[0x7e6e24b0] 0000 0000 0000 0000 0000 0000 0000 0000
[0x7e6e24b4] 0000 0000 0000 0000 0000 0000 0000 0000
[0x7e6e24b8] 0000 0000 0000 0000 0000 0000 0000 0000
[0x7e6e24bc] 0000 0000 0000 0000 0000 0000 0000 0000
[0x7e6e24d4] 0000 0000 0000 0000 0000 0000 0000 0000
[0x7e6e24d8] 0000 0000 0000 0000 0000 0000 0000 0000
[0x7e6e2510] 0000 0000 0000 0000 0000 0000 0000 0000
[0x7e6e251c] 0000 0000 0000 0000 0000 0000 0000 0000
uart:~$ platform sensor
sensor - SENSOR relative command.
Subcommands:
list_all :List all SENSOR config.
get :Get SENSOR config
uart:~$ platform sensor list_all
---------------------------------------------------------------------------------
[0x1 ] Unsupported name : tmp75 | access[O] | vr | 23
[0x2 ] Unsupported name : tmp75 | access[O] | vr | 33
[0x3 ] Unsupported name : tmp75 | access[O] | vr | 23
[0xd ] Unsupported name : nvme | access[O] | vr | 26
[0x5 ] Unsupported name : peci | access[O] | vr | 28
[0x14] Unsupported name : peci | access[O] | vr | 72
[0x15] Unsupported name : peci | access[O] | vr | 100
[0x6 ] Unsupported name : peci | access[O] | vr | 29
[0x7 ] Unsupported name : peci | access[O] | vr | 28
[0x9 ] Unsupported name : peci | access[O] | vr | 27
[0xa ] Unsupported name : peci | access[O] | vr | 28
[0xb ] Unsupported name : peci | access[O] | vr | 27
[0xc ] Unsupported name : peci | access[O] | vr | 26
[0x38] Unsupported name : peci | access[O] | vr | 45875265
[0x20] Unsupported name : adc | access[O] | vr | 46727180
[0x22] Unsupported name : adc | access[O] | vr | 23199747
[0x24] Unsupported name : adc | access[O] | vr | 3866625
[0x21] Unsupported name : adc | access[O] | vr | 7274499
[0x25] Unsupported name : adc | access[O] | vr | 65404932
[0x26] Unsupported name : adc | access[O] | vr | 38404108
[0x27] Unsupported name : adc | access[O] | vr | 12976129
[0x28] Unsupported name : adc | access[O] | vr | 20971523
[0x23] Unsupported name : adc | access[O] | vr | 52494337
[0x2e] Unsupported name : vr | access[O] | vr | 9306113
[0x2f] Unsupported name : vr | access[O] | vr | 3276801
[0x2d] Unsupported name : vr | access[O] | vr | 52428801
[0x2a] Unsupported name : vr | access[O] | vr | 50921473
[0x2c] Unsupported name : vr | access[O] | vr | 53608449
[0x34] Unsupported name : vr | access[O] | vr | 45875202
[0x35] Unsupported name : vr | access[O] | vr | 45875208
[0x33] Unsupported name : vr | access[O] | vr | 52428800
[0x31] Unsupported name : vr | access[O] | vr | 45875226
[0x32] Unsupported name : vr | access[O] | vr | 13107203
[0x12] Unsupported name : vr | access[O] | vr | 32
[0x13] Unsupported name : vr | access[O] | vr | 36
[0x11] Unsupported name : vr | access[O] | vr | 31
[0xf ] Unsupported name : vr | access[O] | vr | 41
[0x10] Unsupported name : vr | access[O] | vr | 37
[0x3e] Unsupported name : vr | access[O] | vr | 2
[0x3f] Unsupported name : vr | access[O] | vr | 9
[0x3d] Unsupported name : vr | access[O] | vr | 1
[0x3a] Unsupported name : vr | access[O] | vr | 47
[0x3c] Unsupported name : vr | access[O] | vr | 6
[0x4 ] Unsupported name : pch | access[O] | vr | 36
[0x39] Unsupported name : hsc | access[O] | vr | 89
[0x30] Unsupported name : hsc | access[O] | vr | 7
[0x29] Unsupported name : hsc | access[O] | vr | 12
[0xe ] Unsupported name : hsc | access[O] | vr | 29
---------------------------------------------------------------------------------
uart:~$ platform sensor get 0x1
[0x1 ] Unsupported name : tmp75 | access[O] | vr | 23
uart:~$ platform sensor get 0x3
[0x3 ] Unsupported name : tmp75 | access[O] | vr | 23
Summary: - Support get/set fan control mode. - Support get/set fan duty. - Support get fan RPM. Test plan: - Build code: Pass - Fan control: Pass Log: 1. Get and set FAN control mode. root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Normal root@bmc-oob:~# fan-util --auto-mode disable root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Manual root@bmc-oob:~# fan-util --auto-mode enable root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Normal 2. Use manual command in auto mode. root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Normal root@bmc-oob:~# fan-util --get Fan 0 Speed: 8059 RPM (70%) Fan 1 Speed: 7324 RPM (70%) Fan 2 Speed: 8059 RPM (70%) Fan 3 Speed: 7305 RPM (70%) Fan 4 Speed: 8070 RPM (70%) Fan 5 Speed: 7351 RPM (70%) Fan 6 Speed: 8048 RPM (70%) Fan 7 Speed: 7324 RPM (70%) Fan Mode: Normal FSCD Driver: linear_nic(nic:nic_sensor_temp) Sensor Fail: None Fan Fail: None root@bmc-oob:~# fan-util --set 30 Setting Zone 0 speed to 30% Setting Zone 1 speed to 30% Setting Zone 2 speed to 30% Setting Zone 3 speed to 30% - Check fan speeds don't change root@bmc-oob:~# fan-util --get Fan 0 Speed: 8059 RPM (70%) Fan 1 Speed: 7315 RPM (70%) Fan 2 Speed: 8059 RPM (70%) Fan 3 Speed: 7324 RPM (70%) Fan 4 Speed: 8070 RPM (70%) Fan 5 Speed: 7324 RPM (70%) Fan 6 Speed: 8026 RPM (30%) Fan 7 Speed: 7315 RPM (70%) Fan Mode: Normal FSCD Driver: linear_nic(nic:nic_sensor_temp) Sensor Fail: None Fan Fail: None 3. Use manual command in manual mode. root@bmc-oob:~# fan-util --auto-mode disable root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Manual root@bmc-oob:~# fan-util --get Fan 0 Speed: 8081 RPM (70%) Fan 1 Speed: 7324 RPM (70%) Fan 2 Speed: 8093 RPM (70%) Fan 3 Speed: 7315 RPM (70%) Fan 4 Speed: 8115 RPM (70%) Fan 5 Speed: 7333 RPM (70%) Fan 6 Speed: 8059 RPM (70%) Fan 7 Speed: 7333 RPM (70%) Fan Mode: Manual(No fscd running) FSCD Driver: Not support in manual mode(No fscd running) Sensor Fail: Not support in manual mode(No fscd running) Fan Fail: Not support in manual mode(No fscd running) - Set fan duty 30 root@bmc-oob:~# fan-util --set 30 Setting Zone 0 speed to 30% Setting Zone 1 speed to 30% Setting Zone 2 speed to 30% Setting Zone 3 speed to 30% root@bmc-oob:~# fan-util --get Fan 0 Speed: 2913 RPM (30%) Fan 1 Speed: 2693 RPM (30%) Fan 2 Speed: 2834 RPM (30%) Fan 3 Speed: 2627 RPM (30%) Fan 4 Speed: 2840 RPM (30%) Fan 5 Speed: 2677 RPM (30%) Fan 6 Speed: 2825 RPM (30%) Fan 7 Speed: 2692 RPM (30%) Fan Mode: Manual(No fscd running) FSCD Driver: Not support in manual mode(No fscd running) Sensor Fail: Not support in manual mode(No fscd running) Fan Fail: Not support in manual mode(No fscd running) - Set fan duty 50 root@bmc-oob:~# fan-util --set 50 Setting Zone 0 speed to 50% Setting Zone 1 speed to 50% Setting Zone 2 speed to 50% Setting Zone 3 speed to 50% root@bmc-oob:~# fan-util --get Fan 0 Speed: 5683 RPM (50%) Fan 1 Speed: 5139 RPM (50%) Fan 2 Speed: 5666 RPM (50%) Fan 3 Speed: 5148 RPM (50%) Fan 4 Speed: 5672 RPM (50%) Fan 5 Speed: 5135 RPM (50%) Fan 6 Speed: 5655 RPM (50%) Fan 7 Speed: 5166 RPM (50%) Fan Mode: Manual(No fscd running) FSCD Driver: Not support in manual mode(No fscd running) Sensor Fail: Not support in manual mode(No fscd running) Fan Fail: Not support in manual mode(No fscd running) - Set fan duty 100 root@bmc-oob:~# fan-util --set 100 Setting Zone 0 speed to 100% Setting Zone 1 speed to 100% Setting Zone 2 speed to 100% Setting Zone 3 speed to 100% root@bmc-oob:~# fan-util --get Fan 0 Speed: 11765 RPM (100%) Fan 1 Speed: 10731 RPM (100%) Fan 2 Speed: 11742 RPM (100%) Fan 3 Speed: 10751 RPM (100%) Fan 4 Speed: 11695 RPM (100%) Fan 5 Speed: 10711 RPM (100%) Fan 6 Speed: 11672 RPM (100%) Fan 7 Speed: 10770 RPM (100%) Fan Mode: Manual(No fscd running) FSCD Driver: Not support in manual mode(No fscd running) Sensor Fail: Not support in manual mode(No fscd running) Fan Fail: Not support in manual mode(No fscd running) 4. Use auto command in auto mode. root@bmc-oob:~# fan-util --auto-mode enable root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Normal root@bmc-oob:~# root@bmc-oob:~# fan-util --get Fan 0 Speed: 8138 RPM (70%) Fan 1 Speed: 7435 RPM (70%) Fan 2 Speed: 8172 RPM (70%) Fan 3 Speed: 7416 RPM (70%) Fan 4 Speed: 8183 RPM (70%) Fan 5 Speed: 7398 RPM (70%) Fan 6 Speed: 8115 RPM (70%) Fan 7 Speed: 7407 RPM (70%) Fan Mode: Normal FSCD Driver: linear_nic(nic:nic_sensor_temp) Sensor Fail: None Fan Fail: None 5. Error Test. - Set out of fan index: 0x05 root@bmc-oob:~# bic-util slot1 0xe0 0x02 0x9c 0x9c 0x00 0x10 0xC0 0xF1 0x05 0x00 9C 9C 00 10 31 F1 C9 - Set fan duty more than 100: 0xFF root@bmc-oob:~# bic-util slot1 0xe0 0x02 0x9c 0x9c 0x00 0x10 0xC0 0xF1 0x02 0xFF 9C 9C 00 10 31 F1 C9
SaraSYLin
force-pushed
the
Sara/main2_fby3.5-bb-Support_fan_control
branch
from
13faaaa to
290dbd3
Compare
Contributor
|
@DelphineChiu has updated the pull request. You must reimport the pull request before landing. |
facebook-github-bot
pushed a commit
that referenced
this pull request
Apr 19, 2022
Summary: fby3.5: bb: Support fan control - Support get/set fan control mode. - Support get/set fan duty. - Support get fan RPM. Dependency: #240 Pull Request resolved: #241 Test Plan: - Build code: Pass - Fan control: Pass Log: 1. Get and set FAN control mode. root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Normal root@bmc-oob:~# fan-util --auto-mode disable root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Manual root@bmc-oob:~# fan-util --auto-mode enable root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Normal 2. Use manual command in auto mode. root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Normal root@bmc-oob:~# fan-util --get Fan 0 Speed: 8059 RPM (70%) Fan 1 Speed: 7324 RPM (70%) Fan 2 Speed: 8059 RPM (70%) Fan 3 Speed: 7305 RPM (70%) Fan 4 Speed: 8070 RPM (70%) Fan 5 Speed: 7351 RPM (70%) Fan 6 Speed: 8048 RPM (70%) Fan 7 Speed: 7324 RPM (70%) Fan Mode: Normal FSCD Driver: linear_nic(nic:nic_sensor_temp) Sensor Fail: None Fan Fail: None root@bmc-oob:~# fan-util --set 30 Setting Zone 0 speed to 30% Setting Zone 1 speed to 30% Setting Zone 2 speed to 30% Setting Zone 3 speed to 30% - Check fan speeds don't change root@bmc-oob:~# fan-util --get Fan 0 Speed: 8059 RPM (70%) Fan 1 Speed: 7315 RPM (70%) Fan 2 Speed: 8059 RPM (70%) Fan 3 Speed: 7324 RPM (70%) Fan 4 Speed: 8070 RPM (70%) Fan 5 Speed: 7324 RPM (70%) Fan 6 Speed: 8026 RPM (30%) Fan 7 Speed: 7315 RPM (70%) Fan Mode: Normal FSCD Driver: linear_nic(nic:nic_sensor_temp) Sensor Fail: None Fan Fail: None 3. Use manual command in manual mode. root@bmc-oob:~# fan-util --auto-mode disable root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Manual root@bmc-oob:~# fan-util --get Fan 0 Speed: 8081 RPM (70%) Fan 1 Speed: 7324 RPM (70%) Fan 2 Speed: 8093 RPM (70%) Fan 3 Speed: 7315 RPM (70%) Fan 4 Speed: 8115 RPM (70%) Fan 5 Speed: 7333 RPM (70%) Fan 6 Speed: 8059 RPM (70%) Fan 7 Speed: 7333 RPM (70%) Fan Mode: Manual(No fscd running) FSCD Driver: Not support in manual mode(No fscd running) Sensor Fail: Not support in manual mode(No fscd running) Fan Fail: Not support in manual mode(No fscd running) - Set fan duty 30 root@bmc-oob:~# fan-util --set 30 Setting Zone 0 speed to 30% Setting Zone 1 speed to 30% Setting Zone 2 speed to 30% Setting Zone 3 speed to 30% root@bmc-oob:~# fan-util --get Fan 0 Speed: 2913 RPM (30%) Fan 1 Speed: 2693 RPM (30%) Fan 2 Speed: 2834 RPM (30%) Fan 3 Speed: 2627 RPM (30%) Fan 4 Speed: 2840 RPM (30%) Fan 5 Speed: 2677 RPM (30%) Fan 6 Speed: 2825 RPM (30%) Fan 7 Speed: 2692 RPM (30%) Fan Mode: Manual(No fscd running) FSCD Driver: Not support in manual mode(No fscd running) Sensor Fail: Not support in manual mode(No fscd running) Fan Fail: Not support in manual mode(No fscd running) - Set fan duty 50 root@bmc-oob:~# fan-util --set 50 Setting Zone 0 speed to 50% Setting Zone 1 speed to 50% Setting Zone 2 speed to 50% Setting Zone 3 speed to 50% root@bmc-oob:~# fan-util --get Fan 0 Speed: 5683 RPM (50%) Fan 1 Speed: 5139 RPM (50%) Fan 2 Speed: 5666 RPM (50%) Fan 3 Speed: 5148 RPM (50%) Fan 4 Speed: 5672 RPM (50%) Fan 5 Speed: 5135 RPM (50%) Fan 6 Speed: 5655 RPM (50%) Fan 7 Speed: 5166 RPM (50%) Fan Mode: Manual(No fscd running) FSCD Driver: Not support in manual mode(No fscd running) Sensor Fail: Not support in manual mode(No fscd running) Fan Fail: Not support in manual mode(No fscd running) - Set fan duty 100 root@bmc-oob:~# fan-util --set 100 Setting Zone 0 speed to 100% Setting Zone 1 speed to 100% Setting Zone 2 speed to 100% Setting Zone 3 speed to 100% root@bmc-oob:~# fan-util --get Fan 0 Speed: 11765 RPM (100%) Fan 1 Speed: 10731 RPM (100%) Fan 2 Speed: 11742 RPM (100%) Fan 3 Speed: 10751 RPM (100%) Fan 4 Speed: 11695 RPM (100%) Fan 5 Speed: 10711 RPM (100%) Fan 6 Speed: 11672 RPM (100%) Fan 7 Speed: 10770 RPM (100%) Fan Mode: Manual(No fscd running) FSCD Driver: Not support in manual mode(No fscd running) Sensor Fail: Not support in manual mode(No fscd running) Fan Fail: Not support in manual mode(No fscd running) 4. Use auto command in auto mode. root@bmc-oob:~# fan-util --auto-mode enable root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Normal root@bmc-oob:~# root@bmc-oob:~# fan-util --get Fan 0 Speed: 8138 RPM (70%) Fan 1 Speed: 7435 RPM (70%) Fan 2 Speed: 8172 RPM (70%) Fan 3 Speed: 7416 RPM (70%) Fan 4 Speed: 8183 RPM (70%) Fan 5 Speed: 7398 RPM (70%) Fan 6 Speed: 8115 RPM (70%) Fan 7 Speed: 7407 RPM (70%) Fan Mode: Normal FSCD Driver: linear_nic(nic:nic_sensor_temp) Sensor Fail: None Fan Fail: None 5. Error Test. - Set out of fan index: 0x05 root@bmc-oob:~# bic-util slot1 0xe0 0x02 0x9c 0x9c 0x00 0x10 0xC0 0xF1 0x05 0x00 9C 9C 00 10 31 F1 C9 - Set fan duty more than 100: 0xFF root@bmc-oob:~# bic-util slot1 0xe0 0x02 0x9c 0x9c 0x00 0x10 0xC0 0xF1 0x02 0xFF 9C 9C 00 10 31 F1 C9 Reviewed By: garnermic Differential Revision: D35731229 Pulled By: GoldenBug fbshipit-source-id: 2435f03fb026e14c63c513fe1431bb214cb8fb34
facebook-github-bot
pushed a commit
that referenced
this pull request
Apr 19, 2022
Summary: fby3.5: bb: Support get MB index - Support getting motherboards index. Dependency: #241 Pull Request resolved: #242 Test Plan: - Build code: Pass - Get MB index: Pass Log: 1. Check can get MB index successful. - Slot 1 root@bmc-oob:~# bic-util slot1 0xE0 0x02 0x9C 0x9C 0x00 0x10 0xC0 0xF0 9C 9C 00 10 31 F0 00 01 - Slot 3 root@bmc-oob:~# bic-util slot1 0xE0 0x02 0x9C 0x9C 0x00 0x10 0xC0 0xF0 9C 9C 00 10 31 F0 00 03 Reviewed By: garnermic Differential Revision: D35731231 Pulled By: GoldenBug fbshipit-source-id: 4e95e658ba97465e053eb44eec93dd1b3b3bde4f
facebook-github-bot
pushed a commit
that referenced
this pull request
Apr 26, 2022
Summary: fby3.5: bb: Support fan control - Support get/set fan control mode. - Support get/set fan duty. - Support get fan RPM. Dependency: #240 Pull Request resolved: #241 Test Plan: - Build code: Pass - Fan control: Pass Log: 1. Get and set FAN control mode. root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Normal root@bmc-oob:~# fan-util --auto-mode disable root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Manual root@bmc-oob:~# fan-util --auto-mode enable root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Normal 2. Use manual command in auto mode. root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Normal root@bmc-oob:~# fan-util --get Fan 0 Speed: 8059 RPM (70%) Fan 1 Speed: 7324 RPM (70%) Fan 2 Speed: 8059 RPM (70%) Fan 3 Speed: 7305 RPM (70%) Fan 4 Speed: 8070 RPM (70%) Fan 5 Speed: 7351 RPM (70%) Fan 6 Speed: 8048 RPM (70%) Fan 7 Speed: 7324 RPM (70%) Fan Mode: Normal FSCD Driver: linear_nic(nic:nic_sensor_temp) Sensor Fail: None Fan Fail: None root@bmc-oob:~# fan-util --set 30 Setting Zone 0 speed to 30% Setting Zone 1 speed to 30% Setting Zone 2 speed to 30% Setting Zone 3 speed to 30% - Check fan speeds don't change root@bmc-oob:~# fan-util --get Fan 0 Speed: 8059 RPM (70%) Fan 1 Speed: 7315 RPM (70%) Fan 2 Speed: 8059 RPM (70%) Fan 3 Speed: 7324 RPM (70%) Fan 4 Speed: 8070 RPM (70%) Fan 5 Speed: 7324 RPM (70%) Fan 6 Speed: 8026 RPM (30%) Fan 7 Speed: 7315 RPM (70%) Fan Mode: Normal FSCD Driver: linear_nic(nic:nic_sensor_temp) Sensor Fail: None Fan Fail: None 3. Use manual command in manual mode. root@bmc-oob:~# fan-util --auto-mode disable root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Manual root@bmc-oob:~# fan-util --get Fan 0 Speed: 8081 RPM (70%) Fan 1 Speed: 7324 RPM (70%) Fan 2 Speed: 8093 RPM (70%) Fan 3 Speed: 7315 RPM (70%) Fan 4 Speed: 8115 RPM (70%) Fan 5 Speed: 7333 RPM (70%) Fan 6 Speed: 8059 RPM (70%) Fan 7 Speed: 7333 RPM (70%) Fan Mode: Manual(No fscd running) FSCD Driver: Not support in manual mode(No fscd running) Sensor Fail: Not support in manual mode(No fscd running) Fan Fail: Not support in manual mode(No fscd running) - Set fan duty 30 root@bmc-oob:~# fan-util --set 30 Setting Zone 0 speed to 30% Setting Zone 1 speed to 30% Setting Zone 2 speed to 30% Setting Zone 3 speed to 30% root@bmc-oob:~# fan-util --get Fan 0 Speed: 2913 RPM (30%) Fan 1 Speed: 2693 RPM (30%) Fan 2 Speed: 2834 RPM (30%) Fan 3 Speed: 2627 RPM (30%) Fan 4 Speed: 2840 RPM (30%) Fan 5 Speed: 2677 RPM (30%) Fan 6 Speed: 2825 RPM (30%) Fan 7 Speed: 2692 RPM (30%) Fan Mode: Manual(No fscd running) FSCD Driver: Not support in manual mode(No fscd running) Sensor Fail: Not support in manual mode(No fscd running) Fan Fail: Not support in manual mode(No fscd running) - Set fan duty 50 root@bmc-oob:~# fan-util --set 50 Setting Zone 0 speed to 50% Setting Zone 1 speed to 50% Setting Zone 2 speed to 50% Setting Zone 3 speed to 50% root@bmc-oob:~# fan-util --get Fan 0 Speed: 5683 RPM (50%) Fan 1 Speed: 5139 RPM (50%) Fan 2 Speed: 5666 RPM (50%) Fan 3 Speed: 5148 RPM (50%) Fan 4 Speed: 5672 RPM (50%) Fan 5 Speed: 5135 RPM (50%) Fan 6 Speed: 5655 RPM (50%) Fan 7 Speed: 5166 RPM (50%) Fan Mode: Manual(No fscd running) FSCD Driver: Not support in manual mode(No fscd running) Sensor Fail: Not support in manual mode(No fscd running) Fan Fail: Not support in manual mode(No fscd running) - Set fan duty 100 root@bmc-oob:~# fan-util --set 100 Setting Zone 0 speed to 100% Setting Zone 1 speed to 100% Setting Zone 2 speed to 100% Setting Zone 3 speed to 100% root@bmc-oob:~# fan-util --get Fan 0 Speed: 11765 RPM (100%) Fan 1 Speed: 10731 RPM (100%) Fan 2 Speed: 11742 RPM (100%) Fan 3 Speed: 10751 RPM (100%) Fan 4 Speed: 11695 RPM (100%) Fan 5 Speed: 10711 RPM (100%) Fan 6 Speed: 11672 RPM (100%) Fan 7 Speed: 10770 RPM (100%) Fan Mode: Manual(No fscd running) FSCD Driver: Not support in manual mode(No fscd running) Sensor Fail: Not support in manual mode(No fscd running) Fan Fail: Not support in manual mode(No fscd running) 4. Use auto command in auto mode. root@bmc-oob:~# fan-util --auto-mode enable root@bmc-oob:~# fan-util --auto-mode status Auto Mode: Normal root@bmc-oob:~# root@bmc-oob:~# fan-util --get Fan 0 Speed: 8138 RPM (70%) Fan 1 Speed: 7435 RPM (70%) Fan 2 Speed: 8172 RPM (70%) Fan 3 Speed: 7416 RPM (70%) Fan 4 Speed: 8183 RPM (70%) Fan 5 Speed: 7398 RPM (70%) Fan 6 Speed: 8115 RPM (70%) Fan 7 Speed: 7407 RPM (70%) Fan Mode: Normal FSCD Driver: linear_nic(nic:nic_sensor_temp) Sensor Fail: None Fan Fail: None 5. Error Test. - Set out of fan index: 0x05 root@bmc-oob:~# bic-util slot1 0xe0 0x02 0x9c 0x9c 0x00 0x10 0xC0 0xF1 0x05 0x00 9C 9C 00 10 31 F1 C9 - Set fan duty more than 100: 0xFF root@bmc-oob:~# bic-util slot1 0xe0 0x02 0x9c 0x9c 0x00 0x10 0xC0 0xF1 0x02 0xFF 9C 9C 00 10 31 F1 C9 Reviewed By: garnermic Differential Revision: D35941603 Pulled By: GoldenBug fbshipit-source-id: 7a15fb3a125934655a18d54c72aa9970a1faa7ed
facebook-github-bot
pushed a commit
that referenced
this pull request
Apr 26, 2022
Summary: fby3.5: bb: Support get MB index - Support getting motherboards index. Dependency: #241 Pull Request resolved: #242 Test Plan: - Build code: Pass - Get MB index: Pass Log: 1. Check can get MB index successful. - Slot 1 root@bmc-oob:~# bic-util slot1 0xE0 0x02 0x9C 0x9C 0x00 0x10 0xC0 0xF0 9C 9C 00 10 31 F0 00 01 - Slot 3 root@bmc-oob:~# bic-util slot1 0xE0 0x02 0x9C 0x9C 0x00 0x10 0xC0 0xF0 9C 9C 00 10 31 F0 00 03 Reviewed By: garnermic Differential Revision: D35941628 Pulled By: GoldenBug fbshipit-source-id: f56f194c1b4ddecc55af428602164df22d6a4ba7
This file contains hidden or bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
6 participants
Add this suggestion to a batch that can be applied as a single commit.This suggestion is invalid because no changes were made to the code.Suggestions cannot be applied while the pull request is closed.Suggestions cannot be applied while viewing a subset of changes.Only one suggestion per line can be applied in a batch.Add this suggestion to a batch that can be applied as a single commit.Applying suggestions on deleted lines is not supported.You must change the existing code in this line in order to create a valid suggestion.Outdated suggestions cannot be applied.This suggestion has been applied or marked resolved.Suggestions cannot be applied from pending reviews.Suggestions cannot be applied on multi-line comments.Suggestions cannot be applied while the pull request is queued to merge.Suggestion cannot be applied right now. Please check back later.
fby3.5: bb: Support fan control
Summary:
Dependency: #240
Test plan:
Log:
Get and set FAN control mode.
root@bmc-oob:
# fan-util --auto-mode status# fan-util --auto-mode disableAuto Mode: Normal
root@bmc-oob:
root@bmc-oob:
# fan-util --auto-mode status# fan-util --auto-mode enableAuto Mode: Manual
root@bmc-oob:
root@bmc-oob:~# fan-util --auto-mode status
Auto Mode: Normal
Use manual command in auto mode.
root@bmc-oob:~# fan-util --auto-mode status
Auto Mode: Normal
root@bmc-oob:~# fan-util --get
Fan 0 Speed: 8059 RPM (70%)
Fan 1 Speed: 7324 RPM (70%)
Fan 2 Speed: 8059 RPM (70%)
Fan 3 Speed: 7305 RPM (70%)
Fan 4 Speed: 8070 RPM (70%)
Fan 5 Speed: 7351 RPM (70%)
Fan 6 Speed: 8048 RPM (70%)
Fan 7 Speed: 7324 RPM (70%)
Fan Mode: Normal
FSCD Driver: linear_nic(nic:nic_sensor_temp)
Sensor Fail: None
Fan Fail: None
root@bmc-oob:~# fan-util --set 30
Setting Zone 0 speed to 30%
Setting Zone 1 speed to 30%
Setting Zone 2 speed to 30%
Setting Zone 3 speed to 30%
root@bmc-oob:~# fan-util --get
Fan 0 Speed: 8059 RPM (70%)
Fan 1 Speed: 7315 RPM (70%)
Fan 2 Speed: 8059 RPM (70%)
Fan 3 Speed: 7324 RPM (70%)
Fan 4 Speed: 8070 RPM (70%)
Fan 5 Speed: 7324 RPM (70%)
Fan 6 Speed: 8026 RPM (30%)
Fan 7 Speed: 7315 RPM (70%)
Fan Mode: Normal
FSCD Driver: linear_nic(nic:nic_sensor_temp)
Sensor Fail: None
Fan Fail: None
root@bmc-oob:
# fan-util --auto-mode disable# fan-util --auto-mode statusroot@bmc-oob:
Auto Mode: Manual
root@bmc-oob:~# fan-util --get
Fan 0 Speed: 8081 RPM (70%)
Fan 1 Speed: 7324 RPM (70%)
Fan 2 Speed: 8093 RPM (70%)
Fan 3 Speed: 7315 RPM (70%)
Fan 4 Speed: 8115 RPM (70%)
Fan 5 Speed: 7333 RPM (70%)
Fan 6 Speed: 8059 RPM (70%)
Fan 7 Speed: 7333 RPM (70%)
Fan Mode: Manual(No fscd running)
FSCD Driver: Not support in manual mode(No fscd running)
Sensor Fail: Not support in manual mode(No fscd running)
Fan Fail: Not support in manual mode(No fscd running)
Set fan duty 30
root@bmc-oob:
# fan-util --set 30# fan-util --getSetting Zone 0 speed to 30%
Setting Zone 1 speed to 30%
Setting Zone 2 speed to 30%
Setting Zone 3 speed to 30%
root@bmc-oob:
Fan 0 Speed: 2913 RPM (30%)
Fan 1 Speed: 2693 RPM (30%)
Fan 2 Speed: 2834 RPM (30%)
Fan 3 Speed: 2627 RPM (30%)
Fan 4 Speed: 2840 RPM (30%)
Fan 5 Speed: 2677 RPM (30%)
Fan 6 Speed: 2825 RPM (30%)
Fan 7 Speed: 2692 RPM (30%)
Fan Mode: Manual(No fscd running)
FSCD Driver: Not support in manual mode(No fscd running)
Sensor Fail: Not support in manual mode(No fscd running)
Fan Fail: Not support in manual mode(No fscd running)
Set fan duty 50
root@bmc-oob:
# fan-util --set 50# fan-util --getSetting Zone 0 speed to 50%
Setting Zone 1 speed to 50%
Setting Zone 2 speed to 50%
Setting Zone 3 speed to 50%
root@bmc-oob:
Fan 0 Speed: 5683 RPM (50%)
Fan 1 Speed: 5139 RPM (50%)
Fan 2 Speed: 5666 RPM (50%)
Fan 3 Speed: 5148 RPM (50%)
Fan 4 Speed: 5672 RPM (50%)
Fan 5 Speed: 5135 RPM (50%)
Fan 6 Speed: 5655 RPM (50%)
Fan 7 Speed: 5166 RPM (50%)
Fan Mode: Manual(No fscd running)
FSCD Driver: Not support in manual mode(No fscd running)
Sensor Fail: Not support in manual mode(No fscd running)
Fan Fail: Not support in manual mode(No fscd running)
Set fan duty 100
root@bmc-oob:
# fan-util --set 100# fan-util --getSetting Zone 0 speed to 100%
Setting Zone 1 speed to 100%
Setting Zone 2 speed to 100%
Setting Zone 3 speed to 100%
root@bmc-oob:
Fan 0 Speed: 11765 RPM (100%)
Fan 1 Speed: 10731 RPM (100%)
Fan 2 Speed: 11742 RPM (100%)
Fan 3 Speed: 10751 RPM (100%)
Fan 4 Speed: 11695 RPM (100%)
Fan 5 Speed: 10711 RPM (100%)
Fan 6 Speed: 11672 RPM (100%)
Fan 7 Speed: 10770 RPM (100%)
Fan Mode: Manual(No fscd running)
FSCD Driver: Not support in manual mode(No fscd running)
Sensor Fail: Not support in manual mode(No fscd running)
Fan Fail: Not support in manual mode(No fscd running)
Use auto command in auto mode.
root@bmc-oob:
# fan-util --auto-mode enable# fan-util --auto-mode statusroot@bmc-oob:
Auto Mode: Normal
root@bmc-oob:
## fan-util --getroot@bmc-oob:
Fan 0 Speed: 8138 RPM (70%)
Fan 1 Speed: 7435 RPM (70%)
Fan 2 Speed: 8172 RPM (70%)
Fan 3 Speed: 7416 RPM (70%)
Fan 4 Speed: 8183 RPM (70%)
Fan 5 Speed: 7398 RPM (70%)
Fan 6 Speed: 8115 RPM (70%)
Fan 7 Speed: 7407 RPM (70%)
Fan Mode: Normal
FSCD Driver: linear_nic(nic:nic_sensor_temp)
Sensor Fail: None
Fan Fail: None
Error Test.
Set out of fan index: 0x05
root@bmc-oob:~# bic-util slot1 0xe0 0x02 0x9c 0x9c 0x00 0x10 0xC0 0xF1 0x05 0x00
9C 9C 00 10 31 F1 C9
Set fan duty more than 100: 0xFF
root@bmc-oob:~# bic-util slot1 0xe0 0x02 0x9c 0x9c 0x00 0x10 0xC0 0xF1 0x02 0xFF
9C 9C 00 10 31 F1 C9