fby3.5: Modify ADC average sensor delay time

[DelphineChiu]

Summary:

• Modify ADC average sensor delay time from 50ms to 1ms.
  Due to sampling 100 times and sleeping 50ms (total need to sleep 5s) is too long.

Test plan:

• Build code: Pass
• Get sensor reading: Pass

Log:

1. Check can get sensor reading.
   root@bmc-oob:~# sensor-util slot1 --force
   slot1:
   MB Inlet Temp (0x1) : 30.00 C | (ok)
   MB Outlet Temp (0x2) : 41.00 C | (ok)
   FIO Temp (0x3) : 25.00 C | (ok)
   PCH Temp (0x4) : 47.00 C | (ok)
   SOC CPU Temp (0x5) : 39.00 C | (ok)
   SOC Therm Margin (0x14) : -61.00 C | (ok)
   CPU TjMax (0x15) : 100.00 C | (ok)
   DIMMA Temp (0x6) : 38.00 C | (ok)
   DIMMC Temp (0x7) : 37.00 C | (ok)
   DIMMD Temp (0x9) : 36.00 C | (ok)
   DIMME Temp (0xA) : 38.00 C | (ok)
   DIMMG Temp (0xB) : 36.00 C | (ok)
   DIMMH Temp (0xC) : 34.00 C | (ok)
   SSD0 Temp (0xD) : 29.00 C | (ok)
   HSC Temp (0xE) : 36.90 C | (ok)
   VCCIN SPS Temp (0xF) : 50.00 C | (ok)
   FIVRA SPS Temp (0x10) : 47.00 C | (ok)
   EHV SPS Temp (0x11) : 39.00 C | (ok)
   VCCD SPS Temp (0x12) : 41.00 C | (ok)
   FAON SPS Temp (0x13) : 44.00 C | (ok)
   P12V_STBY Vol (0x20) : 12.16 Volts | (ok)
   P3V_BAT Vol (0x21) : 3.12 Volts | (ok)
   P3V3_STBY Vol (0x22) : 3.34 Volts | (ok)
   P1V8_STBY Vol (0x23) : 1.79 Volts | (ok)
   P1V05_PCH Vol (0x24) : 1.05 Volts | (ok)
   P5V_STBY Vol (0x25) : 4.96 Volts | (ok)
   P12V_DIMM Vol (0x26) : 12.08 Volts | (ok)
   P1V2_STBY Vol (0x27) : 1.19 Volts | (ok)
   P3V3_M2 Vol (0x28) : 3.29 Volts | (ok)
   HSC Input Vol (0x29) : 12.01 Volts | (ok)
   VCCIN VR Vol (0x2A) : 1.78 Volts | (ok)
   FIVRA VR Vol (0x2C) : 1.82 Volts | (ok)
   EHV VR Vol (0x2D) : 1.80 Volts | (ok)
   VCCD VR Vol (0x2E) : 1.14 Volts | (ok)
   FAON VR Vol (0x2F) : 1.05 Volts | (ok)
   HSC Output Cur (0x30) : 9.14 Amps | (ok)
   VCCIN VR Cur (0x31) : 26.60 Amps | (ok)
   FIVRA VR Cur (0x32) : 3.60 Amps | (ok)
   EHV VR Cur (0x33) : 0.90 Amps | (ok)
   VCCD VR Cur (0x34) : 2.60 Amps | (ok)
   FAON VR Cur (0x35) : 8.70 Amps | (ok)
   CPU PWR (0x38) : 65.70 Watts | (ok)
   HSC Input Pwr (0x39) : 108.26 Watts | (ok)
   VCCIN VR Pout (0x3A) : 45.00 Watts | (ok)
   FIVRA VR Pout (0x3C) : 6.00 Watts | (ok)
   EHV VR Pout (0x3D) : 2.00 Watts | (ok)
   VCCD VR Pout (0x3E) : 2.00 Watts | (ok)
   FAON VR Pout (0x3F) : 8.00 Watts | (ok)
   BB_INLET_TEMP (0xD1) : 25.99 C | (ok)
   BB_OUTLET_TEMP (0xD2) : 28.99 C | (ok)
   BB_HSC_TEMP (0xD3) : 24.52 C | (ok)
   BB_P5V_STBY (0xD4) : 5.14 Volts | (ok)
   BB_P12V_STBY (0xD5) : 12.18 Volts | (ok)
   BB_P3V3_STBY (0xD6) : 3.36 Volts | (ok)
   BB_P5V_USB (0xE9) : 5.14 Volts | (ok)
   BB_P1V2_STBY (0xD9) : 1.21 Volts | (ok)
   BB_P1V0_STBY (0xDA) : 1.01 Volts | (ok)
   BB_MEDUSA_VIN (0xDB) : 12.05 Volts | (ok)
   BB_MEDUSA_VOUT (0xD7) : 12.05 Volts | (ok)
   BB_HSC_VIN (0xDC) : 12.02 Volts | (ok)
   BB_MEDUSA_CUR (0xDF) : 12.69 Amps | (ok)
   BB_HSC_IOUT (0xDE) : 6.12 Amps | (ok)
   BB_FAN_IOUT (0xE8) : 2.75 Amps | (ok)
   BB_MEDUSA_PWR (0xD8) : 152.86 Watts | (ok)
   BB_HSC_PIN (0xDD) : 73.23 Watts | (ok)
   BB_HSC_EIN (0xEA) : 71.52 Watts | (ok)
   BB_HSC_PEAK_IOUT (0xEB) : 8.88 Amps | (ok)
   BB_HSC_PEAK_PIN (0xEC) : 107.99 Watts | (ok)

root@bmc-oob:~# sensor-util slot1 | grep FAN
BB_FAN_IOUT (0xE8) : 2.73 Amps | (ok)

[facebook-github-bot]

@GoldenBug has imported this pull request. If you are a Meta employee, you can view this diff on Phabricator.