Type of Raspberry Pi

Raspberry Pi 3 A+

Linux Kernel version

Linux pi3aplus-5 5.10.17-v7+ #1403 SMP Mon Feb 22 11:29:51 GMT 2021 armv7l GNU/Linux

Expected behaviour

Expecting the display to show full screen across all 240x320 pixels on the ST7789 2.0 inch display

Actual behaviour

(Note: In the photo only, colours are slightly over-bright and washed out as I've brightened it up to show the hardware and silkscreen more clearly to clarify exactly what sort of device I'm using. The output that is showing correctly, looks correct as per other ST77xx displays)

Only getting the pixels correctly displaying on the top two thirds of the display, with "scrambled data/corruption" showing in the lower third. I have two of these displays, from the same supplier, and both are doing the same, so I think I can rule out the individual display being at "fault".

I've tried adjusting the height and width (swapping 320 and 240 between height and width), also tried rotate which only rotated within the working two-thirds of the screen.

When I run any demo from luma.examples, I note that it shows "240 x 240" for the Dimensions line, despite having an expected output of 240x320 (or 320x240)

python3 colors.py  --conf ../conf/st7789_240x320.conf
Version: luma.lcd 2.9.0 (luma.core 2.3.1)
Display: st7789
Interface: spi
Dimensions: 240 x 240

My st7789_240x320.conf file contains:

--display=st7789
--interface=spi
--spi-bus-speed=48000000
--gpio-reset=24
--gpio-chip-select=8
--gpio-data-command=23
--gpio-backlight=18
--width=240
--height=320
--backlight-active=high

As noted, I've tried --width=320 and --height=240 but that hasn't made any difference to my issue. Also may be worth noting that the content is centring in the middle of the 240x240 size rather than fitting to a 320 sized width or height.

The demos appear to output a Dimensions: 240 x 240 line with the ST7789 no matter what sizes I specify, even far smaller than the actual display's correct sizes.

I've made two other custom .conf files for ST7735 (Open-Smart 160x80) and ST7789 (Open-Smart 240x240) screens this past week (which I plan to submit as PRs once I've worked through my other various ST77xx based displays to confirm they are working with luma.lcd), so feel I am correctly using the conf file and settings.

Is there a maximum height and width for ST7789 displays?

Because the luma.example demo files output a 240 x 240 from the demo_opts even though I'm setting a higher resolution, it makes me wonder if there is a hard-cap being set on the maximum resolution of the display by the repo, possibly even a fixed resolution for the ST7789, so I think my overall question is if there is a maximum height and width for the ST7789 display?