Circuit for charging and balancing two supercapacitors usable as UPS.
-
Updated
May 15, 2024 - Python
#
mlab-module
Here are 6 public repositories matching this topic...
High precission SHT3x hygrometer (humidity and temperature sensor) in form of MLAB module.
i2c climate sensor temperature mlab humidity i2c-sensors sht31 hygrometer sht3x mlab-sensor mlab-module
-
Updated
Sep 16, 2023 - Python
The base module is an integrated circuit SC18IM700, who works as a converter I2C / UART. I2C interface acts as the master. I2C can be used to speed 400kbit / Sau UART can be up to 460.8 kbit / s.
-
Updated
Sep 17, 2023 - Python
The module allows the generation of PWM signal, which can be adjusted using the I2C interface. The module has eight outputs that can run simultaneously on two frequencies in the range of 0.59 Hz - 152 Hz (with 1.69 - 6.58 ms).
-
Updated
Sep 17, 2023 - Python
I2CHUB02 is low voltage I2C multiplexer (hub) which allows you to divide I2C bus into 8 separate buses, where the user can switch and connect individual sub-bus differently. This can connect multiple I2Cs to the device, change the voltage levels, or disconnect a certain part of the bus when it is stuck.
arduino i2c switch sensors i2c-bus mlab multiplexer i2c-device i2c-switch level-translator mlab-module
-
Updated
Sep 17, 2023 - Python
Light sensor with I2C interface to 168 klx.
-
Updated
May 18, 2024 - Python
Improve this page
Add a description, image, and links to the mlab-module topic page so that developers can more easily learn about it.
Add this topic to your repo
To associate your repository with the mlab-module topic, visit your repo's landing page and select "manage topics."