USB-IF E-Store

Prior to purchasing products from the USB-IF, please review our return policy and legal disclaimer.

Please review the USB-IF Compliance Updates webpage frequently  for the latest information regarding the USB-IF Compliance Program. The updates may contain information on test requirements and/or test procedures.

Subscribe to the USB-IF Compliance Update Mailing List by emailing admin@usb.org.

Product Order Form

To order any of the items below please complete and email the USB Product Order Form:

USB-IF Product Order Form252.38 KB

The form includes pricing for each product. 

Shipping and Handling Fees are not included in the prices.

Insurance, duties, customs and other taxes are not included within the above prices. It is your responsibility, and not that of USB-IF, to pay these taxes and fees.

QuadraMAX 2 USB Type-C® and PD Tester

The USB-IF QuadraMAX 2 is the next gen hardware platform that performs for several certification testing functionalities.  It will function as an electronic load for the USB Type-C® and USB PD Source Power Tests (SPT) and PD CTS Source Power Supply tests, a cable tester for USB Type-C End Product Cable tests (EPC), and PD CTS Source Power Tests, Sink PPS Interoperability Charge Cycle Test, and it provides a manual control window for custom load testing and USB PD traffic generation.
 
QuadraMAX 2 Tool Details

  • The QuadraMAX 2 consists of four tester modules.  Each module has its own power supply and load circuitry and includes a USB Type-C sink/source tester port.
  • Up to two QuadraMAX 2s can be linked for testing devices with up to 8 ports.
  • Each sink can load 240W.  Across four ports the QuadraMAX 2 can maintain 1KW load, with a peak of 1.2KW.
  • QuadraMAX 2 uses a CC load and a CR load.  The CR load is achieved with a 20us FW feedback loop.
  • QuadraMAX 2 Vbus tolerance before load drops is below vSafe0V.  
  • QuadraMAX 2 captures Vbus voltage and current in 1us samples.  Captures are continuous with a directed start and stop.  
  •  Each module can also be programmed to a 20V 5A source.  Source mode is used during cable testing and can also be done for manual debug and development.
  • Each module has switchable ground isolation from the other ports.

 
Each QuadraMAX includes the following:

  • Qty 1 - QuadraMAX 2 includes 1 chassis and 4 tester modules
  •  Qty 4 - QuadraMAX 2 Remote Sense Cables

*****Please note USB-IF will not ship this item to the EU*****

USB4® V2 Evaluation Dock

The USB4 V2 evaluation dock is based on Intel’s JHL9480 (Barlow Ridge) 80/120 controller which supports the newly released USB4 v2 spec.
This is an evaluation Board for 80/120 and USB4 v2 enablement.
Current sampling based on Barlow Ridge QS (Qual Sample) units and not Production level units.
Emphasis on modularity and flexibility will be given in terms of connecting other EVBs to the dock, such as MST hub, USB hub and others to enable different applications.

The USB4 V2 Evaluation Kit:
•    Requires at least 120W (SPD) power supply - not included
•    Requires a certified USB Type-C® cable –not included
•    UFP/DFP PD AIC based on Infineon PMG1 – included
•    DFP/DFP PD AIC based on Infineon CCG8 - included

The latest FW/BKC can be downloaded here.


*****Please note USB-IF will only ship this item to the USA*****

USB4 CV Host System

The USB4 CV Host system is utilized in USB4 CV Testing.  The PC system comprises an USB4 Add-In Host Card configured specifically for USB4 CV testing.

This item is available to USB-IF Members only.. Please note this product has a lead of approximately one month. USB4 CV Host System can be ordered by completing and emailing the USB-IF Product Order Form

USB Type-C ® Authentication Compliance Bridge (ACB)

The USB Type-CTM Authentication Compliance Bridge (ACB) used with the USB Type-CTM Authentication Test Suite in USB3CV to allow testing of USB PD Authentication Responders. The ACB is required for testing USB PD Sources, Sinks, and Cables that support USB Type-CTM Authentication. The ACB is not needed to test USB devices.

QuadraMAX USB Type-C® and PD Tester

The USB-IF QuadraMAX is an official hardware platform for several certification testing functionalities.  It is an electronic load for the USB Type-C and PD Source Power Tests (SPT), a cable tester for USB Type-C End Product Cable tests (EPC), and it provides a manual control window for custom load testing and PD traffic generation.
 
The applicable testing specs are available in the Document Library:
USB Type-CTM and Power Delivery Source Power Requirements Test Specification
USB Type-CTM End Product Cable Test Plan
 
The software can be found here.

QuadraMAX Tool Details

  • The QuadraMAX consists of four sink ports.
  • Up to three QuadraMAXes can be linked for testing devices with up to 12 ports.
  • Each sink can load 100W.  Across four ports the QuadraMAX can maintain 320W load, with a peak of 400W.
  • QuadraMAX uses a CC load and a CR load.  The CR load is achieved with a 75us FW feedback loop.
  • QuadraMAX Vbus tolerance before load drops is 2 V - 2.5 V.  
  • QuadraMAX captures Vbus voltage and current in 15us - 250us adjustable sample rates.  Captures taken during connect / disconnect / voltage transition / load transition / hard reset.
  •  Port 4 can also be programmed to a 5V 5A source.  This is used during cable testing and can also be done for manual debug through the QuadDraw Reins window.
  •  Port 1 has a switchable ground isolation from the other ports during the cable drop test.
  • QuadDraw automatically updates to the latest software and firmware when the controlling computer has an internet connection.

Each QuadraMAX includes the following:

  • Qty 1 - QuadraMAX
  • Qty 1 - Power Supply with ferrite core (12V 4.2A)